Filter
Top Products
ESC a
NLQ Justification
Format:
Comments:
The following values can be used for
n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is
n
= 0. Full justification
(n = 3)
is performed
when the buffer becomes full; HT and BS are invalid except in
n = 0
mode. For
n
= 3 there must be no carriage returns within a
paragraph. Justification can be used in NLQ only not draft.
ESC SP (space)
Format:
Set Intercharacter Space
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of units of space is equal to
n,
which should be from
0-63. Each unit of space is 1/120th of an inch.
A-30
Command Summary