Filter
Top Products
If your application program changes your SelecType settings, you
have two choices:
1. Use the program’s setup procedure (which could be called by
another name, such as install) to remove the codes that interfere
with your SelecType settings.
2. Use the print control codes for your application program instead of
SelecType to control your printing. The manual for your program
tells you how to change the printing style. Most programs that cancel
SelecType settings also have sophisticated print control commands
that give the same results that SelecType does.
Note
Also remember that any control codes in your document will overrule
the SelecType settings. Therefore, if you have a code for NLQ Roman in
your document and you press the
DRAFT
SelecType button, your
printing will still be in NLQ Roman.
Two of the most frequent uses for SelecType are printing spreadsheets
in condensed and changing between NLQ and draft printing. With
SelecType you can use the draft mode to quickly print your first copies
of a document and then switch to NLQ when you have perfected the
document and are ready to print the finished product.
Because the use of SelecType with the IBM printer emulation mode
can produce unexpected results, it is recommended that you should not
use SelecType with that mode.
4-4
SelecType