Filter
Top Products
International Character Sets
Thirteen international character sets are available in Epson mode.
Eight of these are selected by DIP switches 1-6 to 1-8 and the remaining
five (Japan, Norway, Denmark II, Spain II and Latin America) can be
selected with the ESC R command, which is described in the Command
Summary For the characters available in each character set, see
Appendix B.
In IBM printer emulation mode, you can select only two character
sets; the standard character set (Table 1) and the international character
set (Table 2). You can see the differences by looking at the IBM character
tables in Appendix B. There is also a command to let you print any of
the characters in the international character set and seven additional
characters. Together these form the symbol set. The symbol set cannot
be selected permanently because it causes printer commands to be
ignored.
The DIP switch settings to select the different character sets are
shown in Table E-3.
Table E-3. International settings
Note: Shaded items are the factory settings.
E-4
Defaults and DIP Switches