Filter
Top Products
Commands that Are Different from Epson Commands
Printer Operation
ESC Q3
Format:
Deselect Printer
Comments:
Places the printer in an off line state until the printer is turned off and
back on or until it receives a DC1 code.
Vertical Motion
ESC A
Set
n/72-inch Line Spacing
Format:
Comments:
Sets the line spacing to
n/72
of an inch. This value is stored in
memory until the printer receives the ESC 2 command to put it into
effect. The value of
n
must be from 0-85.
ESC 2
Format:
Select Programmable Line Spacing
Comments:
Executes the line spacing stored in memory by ESC A. If no ESC A
command has been sent, ESC 2 sets the line spacing to 1/6 of an
inch. (The 2 is the digit two and not ASCII code 2.)
A-38
Command Summary