Filter
Top Products
ESC j
Perform n/216-inch Reverse Line Feed
Format:
Comments:
Reverses the paper by
n/216
of an inch. Note that ESC j should not
be used near the end of the paper or when printing self-adhesive
labels. If the automatic sheet feeder is selected, this command is
ignored.
Vertical tabbing
VT
Tab Vertically
Format:
Comments:
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
ESC B
Format:
set Vertical Tabs
Sets up to 16 vertical tabs in the current line spacing. Tab settings are
not affected by subsequent changes in line spacing. The tab settings
are entered as
nl, n2,
etc., all from 1-255, in ascending order. The
NUL character indicates the end of the command. All settings are
stored in channel 0 (see ESC b). ESC B NUL clears the tab settings.
A-18
Command Summary