Filter
Top Products
7 Loading Paper
Even if you normally use continuous paper, it is simpler to test the
printer using a single sheet of paper. If you have an EX-1000, be sure to
use 14-inch-wide paper so that none of the self test prints on the platen.
Paper loading icons...
Roth levers on the EX have icons (small pictures) beside them.
These icons (shown below) remind you whether to push the lever
back or pull it forward
when you load
paper.
Now load a sheet of paper:
1. Turn the printer ON first. Do not put the paper in the printer before
you turn it on.
2. Remove the dust cover
3. Push the paper release and paper bail levers back. Note that the
paper bail lever must be in the printing (back) position now. You will
move it to the single-sheet loading (forward) position in step 5.
4. Make sure the
ON LINE
light is OFF If it is ON, press the
ON LINE
button once.
Setting Up the Printer
1-9