Filter
Top Products
DIP Switch Settings
The EX has sixteen DIP (Dual In-line Package) switches that allow
you to change many of the printer’s settings to suit your individual
needs. The DIP switches are in two groups of eight, mounted on the
back panel, as shown in Figure E-l.
Each set of switches is numbered from 1-8 so that DIP switch l-l is
the switch at the far left side and the one at the far right is DIP switch
2-8. You can easily reset the switches with a thin, pointed object such as
a small screwdriver or the cap of a ballpoint pen.
Note
When you change a DIP switch setting, turn off the power, reset the
switch or switches, then turn on the power again. The printer checks
and recognizes new settings only at the time the power is turned on.
Figure E-1.
DIP switch location
E-2
Defaults and DIP Switches