Filter
Top Products
ESC O
Format:
Select 1/8-inch Line Spacing
Comments:
Sets the line spacing to l/8 of an inch for subsequent line feed
commands. The 0 is the digit zero and not ASCII code 0.
Comments:
Sets the line spacing to 7/72 of an inch for subsequent line feed
commands. The 1 is the digit one and not lower case L or ASCII
code 1.
Comments:
Sets the line spacing to l/6 of an inch for subsequent line feed
commands. The “2” is the digit two and not ASCII code 2. This is the
default at power on.
A-16
Command Summary