Filter
Top Products
5-4
Changing Printer Settings From the Printer’s Control Panel
Sun-E+
Rev. C
A5 size Chap5.fm
4/15/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
About Your Printer’s Default Settings
The printer’s default settings control many printer functions.
While you can often set these functions through your software or
printer driver, you may sometimes need to change a default
setting from the printer’s control panel using the default-setting
mode.
The following table lists the default settings and the options you
can select in the default-setting mode. The settings are explained
in detail after the table. For instructions on changing the default
settings, see page 5-9.
Settings Options
Page length for front tractor* Length in inches: 3, 3.5, 4, 5.5, 6, 7,
8, 8.5, 11, 70/6, 12, 14, 17 inches
Page length for rear tractor* Length in inches: 3, 3.5, 4, 5.5, 6, 7,
8, 8.5, 11, 70/6, 12, 14, 17 inches
Skip over perforation On, Off
Auto tear off On, Off
Auto line feed On, Off
Print direction Auto, Bi-D, Uni-D
I/F mode Auto, Parallel, Optional
Auto I/F wait time 10 seconds, 30 seconds
Software ESC/P2, IBM 2391 Plus
Character table Standard model:
Italic, PC 437, PC 850, PC 860, PC 863,
PC 865, PC 861, BRASCII, Abicomp,
Roman 8, ISO Latin 1, PC 858,
ISO 8859-15,
All other models:
Italic, PC 437, PC 850, PC 437 Greek,
PC 853, PC 855, PC 852, PC 857,
PC 864, PC 866, PC 869, MAZOWIA,
Code MJK, ISO 8859-7, ISO Latin 1T,
Bulgaria, PC 774, Estonia, ISO 8859-2,
PC 866 LAT, PC 866 UKR, PC APTEC,
PC 708, PC720, PC AR864, PC 860,
PC 865, PC 861, PC 863, BRASCII,
Abicomp, Roman 8, ISO Latin 1,
PC 858, ISO 8859-15