3
Printing on Single Sheets
3-7
Sun-E+
Rev. C
A5 size Chap3.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
c
Caution:
Because printing on the edge of an envelope may damage the
print head, make sure the printing stays entirely within the
printable area of your envelopes. See Appendix C for details on
the printable area of envelopes.
Loading postcards
You can load postcards one at a time in the top or front paper
slot as described in “Loading Single Sheets in the Top Paper Slot”
(on page 3-8) or “Loading Single Sheets in the Front Paper Slot,”
(on page 3-10). Also, follow these guidelines:
❏ If you load postcards long edge first, always load them in the
top slot.
❏ Set the paper thickness lever (located under the printer cover)
to position 2.
❏ Before printing, turn on the card mode by pressing the Tear
Off/Bin
button until both Tear Off/Bin lights are on.
After you finish printing on postcards, press the
Tear Off/Bin
button once to exit the card mode. (Bin 1 is selected.)
❏ Use postcards only under normal temperature and humidity
conditions, as follows:
Temperature 15 to 25°C (59 to 77°F)
Humidity 30 to 60% RH
New11.epsNew11.eps