Filter
Top Products
2
Printing on Continuous Paper
2-39
Sun-E+
Rev. C
A5 size Chap2.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Advancing the Paper to the Tear-Off Edge
If you use the front or rear push tractor, you can use the tear-off
feature to advance your continuous paper to the printer’s tear-off
edge when you finish printing. You can then easily tear off the
printed document. When you resume printing, the printer
automatically feeds the paper back to the top-of-form position so
that you can save the paper normally lost between documents.
As described below, you can use the tear-off feature in two ways:
manually by pressing the printer’s
Tear Off/Bin
button, or
automatically by turning on the auto tear-off mode.
If the perforation between pages is not aligned with the tear-off
edge, you can adjust the position of the perforation using the
micro adjust feature. See “Adjusting the tear-off position” on page
2-40 for instructions.
c
Caution:
Never use the tear-off feature (by pressing the
Tear Off/Bin
button or turning on the auto tear-off mode as described below)
to feed continuous paper with labels backward; they may come off
their backing sheet and jam the printer.
Using the Tear Off/Bin button
After the printer finishes printing your document, check that the
Tear Off/Bin lights are not flashing. Then press the
Tear Off/Bin
button. The printer advances the paper to the tear-off edge.
Note:
If the Tear Off/Bin lights are flashing, the paper is in the tear-off position.
If you press the
Tear Off/Bin
button, the printer feeds your paper to the
next top-of-form position.