Filter
Top Products
1
Setting Up the Printer
1-17
Sun-E+
Rev. C
A5 size Chap1.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Installing in Windows 3.1 and NT 3.5x
Follows these steps below to install the printer software for
Windows 3.1 or Windows NT 3.5x:
Note:
Installing the printer software for Window NT 3.5x may require
network administration privileges. Ask your network administrator for
more information.
1. Make sure Windows is running and the Program Manager
window is open.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. (If you use the floppy disk version, insert
it in a disk drive.)
3. Choose Run from the File menu. You see the Run dialog box.
In the Command Line box, type D:SETUP and click
OK
. If the
CD-ROM drive has a drive letter other than "D", or if you are
using the floppy disk version, substitute the appropriate
letter.
Note:
If you wish to make a floppy disk version of the printer software included
on your CD-ROM, type EPSETUP instead of SETUP. In the dialog
box that appears, click the Driver disk creation utility button and follow
the on-screen instruction.
4. The installation program begins copying the printer software
files.
5. When the installation is complete, click
OK
to exit the
installation program.
31run.tif