Filter
Top Products
3-10
Printing on Single Sheets
Sun-E+
Rev. C
A5 size Chap3.fm
4/15/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
7. Check and change the printer driver settings as described in
Chapter 4. Then send a print job to the printer.
When the printer receives data, it prints the page and ejects it back
onto the paper guide. To continue printing your document,
remove the printed page and insert a new sheet of paper. If you
need to eject a sheet, press the
Load/Eject
button.
If the first printed line on your page appears too high or low, you
can fix this using the micro adjust feature. See “Adjusting the
Top-of-Form Position” on page 2-36.
c
Caution:
Never use the knob to adjust the top-of-form position or eject a
sheet when the printer is on; this may damage the printer or cause
it to lose the top-of-form position.
Loading Single Sheets in the Front Paper Slot
To load paper in the front paper slot, follow these steps:
1. Make sure the paper guide is installed properly. If not, attach
it as described on page 1-11.
2. Make sure the paper guide cover is closed.