Filter
Top Products
84 Using the Printer Software
Using the EPSON Remote! Utility
The EPSON Remote! utility allows you to easily change the
printer’s default settings from your computer’s DOS prompt.
Installing EPSON Remote!
Follow these steps to install the EPSON Remote! utility:
1. Insert the printer software CD-ROM into the CD-ROM drive.
2. At the DOS prompt, type D:\SETUP. (If you inserted the disk
into a drive other than drive “D,” substitute “D” with the
appropriate letter.) Then press Enter.
3. Select your printer’s name in the Printer Model window and
then press Enter. C:\EPUTIL appears as the default directory.
4. Press Enter again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.
Accessing EPSON Remote!
To access the EPSON Remote! utility, type C:\PRNSET at the DOS
prompt and press Enter. Then follow the on-screen instructions to
use this utility. You can also access the EPSON Remote! utility by
typing C:\PANEL at the DOS prompt and then pressing Enter. The
PRNSET and PANEL access methods differ slightly. The PANEL
method opens a condensed version of EPSON Remote! that only
provides the most often used settings.