Filter
Top Products
94 Troubleshooting
The print position is not what you expected
Paper Handling
Single sheets do not feed properly
Printing starts too high or too low on the page, or the bottom part
of one page is printed at the top of the next page.
Cause What to do
Your application software
settings may be incorrect.
Check the margin or top-of-form
position setting in your application
software.
Page length does not match the length of the paper.
Cause What to do
The page length setting in
your application may be
incorrect.
Check the page length set by your
application software and adjust it if
necessary.
The printer’s page length
setting for the tractor may not
match the size of the
continuous paper you are
using.
Check Page length for tractor if the
printer’s default settings. See “About
Your Printer’s Default Settings” on page
16.
Regular gaps occur in the printout.
Cause What to do
One-inch
skip-over-perforation may be
set.
Set skip-over-perforation to off in the
Default Setting mode. See “About Your
Printer’s Default Settings” on page 16.
Paper does not feed.