Filter
Top Products
98 Troubleshooting
Options
When you use the cut-sheet feeder, the paper does not feed properly
The paper does not feed.
Cause What to do
The cut-sheet feeder may be
incorrectly installed on the
printer.
Reinstall it as described under
“Cut-sheet feeder” on page 49.
The paper-release lever may
be in the wrong position.
Check that the paper-release lever is
pushed back to the single-sheet position.
You may have loaded too
many sheets in the bin.
Remove some sheets. See “Paper” on
page 114 for information on the types
and quantity of paper that can be loaded
with the cut-sheet feeder.
Paper may be jammed near the
print head.
Look for a paper jam.
The edge guide positions may
be incorrect.
Position the edge guides at the
diamond-shaped guide marks.
There may be only one sheet
left in the bin.
Add more paper.
Two or more sheets feed at one time.
Cause What to do
You may have loaded too
many sheets in the bin.
Remove some sheets. See “Paper” on
page 114 for information on the types
and quantity of paper that can be loaded
with the cut-sheet feeder.
You may have forgotten to fan
the stack of paper before
loading it into the bin.
Remove the paper and fan it.