Filter
Top Products
Maintenance and Transporting 43
English
3. After confirming the message on the LCD panel,
press the OK button to restore the settings.
All the settings are restored to their defaults.
Transporting This Product
If you need to transport this product, carefully
repack it using the original box (or a similar box that
this product fits snugly into) and packing materials
as follows:
c
Caution:
❏ When storing or transporting this product, do
not tilt it, stand it on its side, or turn it upside
down. Otherwise ink may leak from the
cartridge.
❏ Leave the ink cartridges in their installed
positions when transporting this product;
removing the cartridges for transportation
may damage this product.
Note:
Do not forget to remove the protective materials from this
product before using it again.
1. Remove all paper from the trays and make sure
that this product is off.
2. Open the scanner unit.
3. Make
sure that the print head is in the home
position on the right.
4. Close the scanner unit.
5. Open the document cover and slide the
transportation clamp to lock the scanner
carriage.
6. Unplug the power cord from the electrical outlet.
7. Close the CD/DVD guide if it is open. And then
close the paper support, feeder guard, output
tray, and front tray
.
8. Attach the protective materials to both sides of
this product, and then repack this product and
attachments in the box.
Note:
Be careful not to catch the document cover's cable on
anything.
9. Keep this product on a flat surface to protect it
from shocks during transportation.
Changing the language
displayed on the LCD panel
You can change the language displayed on the LCD
panel.
1. Press the Setup button.
2. Press the u or d button to select Language.
3. Press the u or d button to select the language
that you want to display, then press the OK
button.