Filter
Top Products
Basic Copying 5
English
Basic Copying
Overview of the Basic
Procedure
1. Press the Copy button.
2. Load appropriate paper.
& See “Loading Paper” of the next section
3. Place the original document.
& See “Placing a Photo or Document on the
Document Table” on page 7
4. Change the copy layout if necessary.
& See “Changing the Copy Layout” on page 8
5. You can change the copy settings if necessary.
& See “Changing Copy Settings” on page 9
6. Press the x Color button to copy in color, or
x B&W button to copy in grayscale.
Note:
❏ If you need to stop copying, press the y Stop
button.
❏ Do not pull the paper out of this product.
❏ If the edge of the document is not copied correctly,
place the document slightly away from the edge
of the document table.
c
Caution:
Never open the scanner unit while scanning or
copying; otherwise, you may damage this product.
Loading Paper
Note:
❏ Always load paper before you start printing.
❏ The print result is affected by the kind of paper you
use. For the best quality, use the appropriate paper.
❏ Keep enough space in front of this product for paper
to be fully ejected.
❏ Make sure the CD/DVD tray is not inserted in this
product and the CD/DVD guide is closed.
Loading A4 plain paper into the
front tray
Note:
Only A4 plain paper can be loaded into the front tray.
When loading paper other than A4 plain paper, load into
the back tray.
1. Open the front cover by pressing the hollow
portion as illustrated.
2. Fan a stack of paper, then tap it on a flat surface
to even the edges.
3. Load the paper with the printable side facing
down flash with the right edge guide. Then, slide
the paper into the front tray so that the edge of the
paper is level with the guideline on the front tray.