Filter
Top Products
6 Basic Copying
c
Caution:
Do not push the paper too far. If you do so, the
paper is not loaded correctly.
4. Slide the left edge guide so that it meets the left
edge of the paper.
5. Pull the output tray and slide out the extension.
Note:
❏ You can load up to 150 sheets at a time.
❏ You cannot use plain paper when Borderless has been
selected in the Copy Layout.
Loading paper into the back tray
1. Open the feeder guard.
2. Pull the paper support and slide out the
extension.
3. Open the front cover by pressing the hollow
portion as illustrated.
4. Pull the output tray and slide out the extension.
5. Fan a stack of paper, then tap it on a flat surface
to even the edges.
6. Load the paper with the printable side facing up
and so it is against the right edge guide, then
slide it into the back tray.
Note:
Always load paper into the trays by the short edge
first.
The paper is pushed past the
guideline for A4 paper.
Some sheets of paper are
pushed past the guideline
for A4 paper.