Filter
Top Products
Format
ICE CONTROL SOFTWARE ICS62XX
S1C62 FAMILY EPSON VIII-45
DEVELOPMENT TOOL REFERENCE MANUAL
Function
SET DATA RAM SD
#SD,<address> (With guidance)
Contents of the data RAM area <address> are displayed or modified.
(1) Data cannot be written to the read only area.
(2) Data in the write only area cannot be read.
#SD,20
20 5:A ... Contents of address 20 are modified and stored to A
21 5:^ ... Return to previous address (one less than the current
20 A:B address) by entering ^
21 5:F
22 5:/ ... Instruction terminated by /
#SD,FFF
* COMMAND ERROR * ... When specification exceeds the maximum value of the
RAM area (7F for S1C6S3N7/66S3B7/6S3L7), an
error is indicated
#SD,70
70 4:-
71 F:- ... Hyphen only displayed due to read only address;
72 5:- data input not accepted
73 6:-
74 6:5
75 8:4
76 5:A
77 8:9
78 8:5
79 A:-
7A B:-
: : :
7E F:- ... Command terminates after last address entered
#SD,E50
* UNUSED AREA * ... When an unused area has been specified, "UNUSED
AREA" is displayed (for S1C6S460)
#SD,ECE
ECE 0:F
ECF 4:F
* UNUSED AREA * ...
When an unused area is entered into during data setting,
"UNUSED AREA" is displayed (for S1C6S460)
Examples