Filter
Top Products
Format
ICE CONTROL SOFTWARE ICS62XX
VIII-88 EPSON S1C62 FAMILY
DEVELOPMENT TOOL REFERENCE MANUAL
HELP
#HELP (With guidance)
#HELP,n (n=1 to 8)
#HELP,2
2.SET COMMAND
(1)#A,addr assemble program.
(2)#FP,addr1,addr2,data fill program addr1 to addr2 by data.
(3)#FD,addr1,addr2,data fill data addr1 to addr2 by data.
(4)#MP,addr1,addr2,addr3 move program from addr1..addr2 to addr3.
(5)#MD,addr1,addr2,addr3 move data from addr1..addr2 to addr3.
(6)#SP,addr program area patch.
(7)#SD,addr data area patch.
(8)#SR or #SR,reg,data register patch.
(9)#SXY MX,MY patch.
(10)#HC,S/C/E history Start/Center/End set.
(11)#HA,addr1,addr2 set PC addr1..addr2 save to history memory.
(#HA,ALL) (all data save.)
(12)#HAR,addr1,addr2 inhibit PC addr1..addr2 save to history memory.
(#HAR,ALL) (all reset.)
(13)#HPS,addr set history pointer.
(14)#CVR reset coverage information.
#
#HELP,3
3.BREAK and GO COMMAND
(1)#BA,addr,... set break address.
(2)#BD set break data condition.
(3)#BR set break register condition.
(4)#BM set break address,data,register multiple condition.
(5)#BAR reset break address.
(6)#BDR reset break data condition.
(7)#BRR reset break register condition.
(8)#BMR reset break address,data,register multiple condition.
(9)#BRES reset all break condition.
(10)#BC break condition display.
(11)#G or #G,addr GO current address or GO from set addr.
(12)#G,R GO after reset cpu.
(13)#T,addr,step single step run and display break information.
(14)#U,addr,step single step run in ICE. and display last break information.
(15)#BSYN set break disable mode.
(16)#BE set break enable mode.
(17)#BT set and reset break trace made. (alternate)
(18)#BRKSEL,CLR/REM set break address clear mode or remain mode.
#
Examples