Filter
Top Products
Format
ICE CONTROL SOFTWARE ICS62XX
S1C62 FAMILY EPSON VIII-81
DEVELOPMENT TOOL REFERENCE MANUAL
TIME OR STEP MODE SELECTION TIM
#TIM (Toggle)
When the GO command is entered, the execution time counter, execution time count mode
or step count mode is operative. The execution time count mode is the default at power on.
The setting is reversed at each command input.
Function
#TIM
* STEP COUNT MODE ... Since the mode after power supply is the time count mode,
entering a command toggles the setting to step mode
#TIM
* TIME COUNT MODE ... Setting is reversed with each command input
#
Examples
Refer to Section 2.3.10, "Measurement during command execution", for more details on the
time count and step count modes.
Note