Filter
Top Products
DEVELOPMENT TOOL MANAGEMENT SYSTEM DMS6200
S1C62 FAMILY EPSON II-3
DEVELOPMENT TOOL REFERENCE MANUAL
(3) Input the number of the development support tool you wish to start and then press the "RETURN" key.
Next, the screen for entering the source file will be displayed.
Input Number ? [1 ]
(4) The following sample screen is the screen which will be displayed when ASM62XX is selected.
Input the number of the source file.
Pressing the "ESC" key here will return the previous screen.
When the source file is selected by number, the edit line enclosed in [ ] will appear; enter the option
parameter if necessary. The "BS" key is valid on the edit line. Press the "RETURN" key when input is
completed.
Source file selection screen
DMS6200 Version 1.0 Copyright(C) SEIKO EPSON CORP. 1991.
1) C2XXYYY .DAT
2) C28XYYY .MDT
3) C28XYYY .MPR
4) C2XXYYY .PRN
5) C2XXYYY .SEG
6) C28XYYYA.DOC
7) C28XYYYA.HEX
8) C2XXYYYF.DOC
9) C2XXYYYF.HEX
10) C2XXYYYH.HEX
11) C2XXYYYL.HEX
12) C2XXYYYS.DOC
13) C2XXYYYS.HEX
14) C62XXYYY.PA0
Input Number ? [1 ]
Edit > [ASM62XX C2XXYYY ]
The above operation will activate the ASM62XX. (The MLA628X will also activate with the same
operation.)
When the source file is in another file or directory it will not be displayed in the menu. In such cases
you skip the number input using the return key and input the drive/directory and source file name in
the edit line.
When starting, press the "RETURN" key twice particularly for the support tools which do not require
source files (except the ASM62XX and the MLA628X).
Refer to the support manuals regarding operations after starting.
(5) When execution of the development support tool is completed, the following message will appear:
Input Any Key ...
Press any key and the first menu screen will be returned.