Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
2-7
Technician Review of Printer Features (continued)
Function Description
Power
button and
LED
Printer connected to the PC:
The Power button turns the Printer ON and OFF. (Note: When lit, the
blue LED light indicates when power is ON.)
Press the Power button to turn the Printer ON and OFF.
The blue LED above the button turns OFF or ON to indicate when
power is applied. (Note: This LED will flash when the Printer is
processing a print job.)
If the Power button is pressed during a print job, the print job will be
lost and the Printer will reset (depends on Windows configuration).
Printer not connected to the PC:
Press the Power button to turn the Printer ON and OFF. (Note: The
blue LED above the button turns OFF or ON to indicate when power is
applied. This is the only active button when the Printer is not connected
to the PC.)
All other buttons will not function and a Card Printer self-test will not be
possible. (Note: When the Printer is not connected and the Card
Cartridge and Ink Cartridge are not installed, only the Ink LED will flash
as this is controlled by firmware.)
The Card LED will not flash in this mode when the Card Cartridge is not
installed. (Note: The Printer must be connected to the PC for the Card
LED to flash.)
(Note: Avoid pressing multiple buttons simultaneously or pressing and
holding a button or combination of buttons.)
See the Interpreting the LED Lights procedure.