Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
14
Section 9: Index
A
About button, 4-42
AC - Alternating Current, 8-1
Accepted Card Thickness, 2-15
Accepted Card Types, 2-15
Accepted Standard Card Sizes, 2-15
Adhesion, 8-1
adjusting color hue, saturation and brightness, 2-42
Algebraic, 8-1
ANSI (American National Standards Institute), 8-1
ASCII (American Standard Code for Information
Interchange), 8-1
ASCII Offset, 2-24, 2-54, 4-56
Auto Eject 1st Error option, 4-52
automated process, 2-42
Automatic Image Enhancement, 2-22, 2-53
available USB port, 2-19
B
Bad Card Cartridge Tag Detection (See Card LED), 2-35
bad Smart tag, 3-17
Banding, 2-62
Barcodes, 8-2
Batch print, 8-2
batch printing, 4-52
Bi-directional, 8-2
BIOS (Basic Input/Output System), 8-2
Bit, 8-2
Bit Density, 4-55
Bit map, 8-2
Black Ink Cartridge, 2-24, 2-26, 2-54, 4-70
Black Ink Cartridge Low, 3-10, 4-70
Black Ink Cartridge Not Installed, 3-10
Black Ink Cartridge Out, 3-10
Black Ink Cartridge Problem, 3-10
Board, 8-2
Boot-up, 8-2
reports incorrect Ink Cartridge install, 2-51
Black Ink Cartridge (900 card minimum, 2-35
Buffer, 8-2
C
Cable, 8-2
Cache, 8-3
Calibrating, 8-3
Cancel / Retry button, 2-37, 2-41, 2-46, 2-60
cancel all print jobs, 2-37
Cancel button, 2-11, 2-37
Cancel soft key, 4-52
Cancelled Card in Encoding Module!, 3-16
Card and Ink LED, 3-18
Card and Ink LED Indicators, 3-17
Card button, 2-36
Card button and LED, 2-9, 2-36
Card Cartridge, 2-26, 2-38
Card Cartridge Capacity, 2-15
Card Cartridge Error Messages, 2-38
Card Cartridge Incorrect Installation, 2-38
Card Cartridge is correctly installed, 2-38
Card Cartridge Label, 2-41
Card Cartridge moved during Smart electronic tag read
cycle, 2-38
Card Cartridge Not Installed, 3-11
Card Cartridge Problem, 3-11
Card Cartridge Replacement, 2-57
Card Encoding, 2-46
Card Error Recovery, 2-39
card image data, 3-19
Card Input Hopper, 2-11
card is jammed, 2-9, 2-36
Card Jam, 3-11
Card Jam in Encoding Module, 3-16
Card LED, 2-40, 2-47
Card LED (bad tag), 2-55
Card LED (card feeding errors), 2-56
Card LED (illegal Card Cartridge), 2-40
Card LED light, 2-9, 2-36
Card Level Monitoring, 2-40
card monitoring, 2-38
Card Output Hopper, 2-5
Card Output Hopper Capacity, 2-15
Card Path, 2-41
Card Printer location, 2-18
Card Printing Jam, 2-43
Card Quantities (50 and 100), 2-41
Card Sensor, 2-43
Card Size, 2-22, 2-42, 2-53, 4-39
Card Status button / LED, 2-9, 2-36
Card tab, 2-22, 2-53
Cards Improperly Loaded, 2-39
card's magnetic stripe, 4-41
Cards Out, 3-11
Cards Out message, 2-57
Cartridge Requirements, 2-48
Cartridge Sensor, 2-41
Cartridge Works, 3-8
CD (Compact Disc), 8-3
Character ASCII Offset, 4-56
Character Parity, 2-24, 2-54, 4-57
Character Size, 2-24, 2-54
Character Size radio buttons, 4-55
Clean Again button, 4-72
Clean Ink Cartridge Nozzles button, 2-24, 2-54
Cleaning Kit, 2-62
Cleaning Pads, 5-4
cleaning process, 4-70
clogs, ink failure, bad electrical connection, 2-29
Closed Lid, 3-8
Coercivity, 8-3
Color Ink Cartridge, 2-24, 2-26, 2-54
Color Ink Cartridge (300 for 410, 250 for C7), 2-44
Color Ink Cartridge Low, 3-12, 4-70
Color Ink Cartridge Not Installed, 3-12
Color Ink Cartridge Out, 3-12