Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
2-52
Technician Handbook for CardJet Card Printers (continued)
Topic Description
InkJet Illegal Ink
Cartridge
Detection (See
Ink LED)
The Printer correctly validates the replacement Cartridge and reports
that it is illegal via the Ink LEDbefore running out of ink and having a
new Ink Cartridge installed. The printing is restarted when the Ink
Cartridge is replaced with a good Cartridge.
Input Hopper The Printer has a special Card Path, an Input Hopper for a Card
Cartridge, extra Card Sensor and a Fargo Controller (2 Boards). This
Printer area stores the blank cards, ready to print.
Installing Ink
Cartridge
Detection (See
Ink LED)
The Printer correctly notifies the Operator of the empty Ink Cartridge via
the Ink LEDbefore running out of ink. The remainder of the print job is
restarted when a new Cartridge is correctly installed.
Interchangeable
Commercial
parts
Both Printers primarily uses customized CardJet parts to ensure
interchangeability and to simplify the problem of field stocking of
replacement parts.
Interface to the
PC
The Printer is equipped with USB interface.
Technicians can access the Printer Driver Operator Interface
window by selecting Start button > Settings > Printers > CardJet
410 Card Printer (right click) > Printing Preferences to bring up the
CardJet 410 or Persona C7 Card Printer Printing Preferences
window.
Technicians can use the Card, Image Quality, Image Position,
Magnetic Encoding and Print Supplies tabs to make appropriate
selections, as described below and (in more detail) in Section 3:
Printer Adjustments.
Continued on the next page