Filter
Top Products
Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
100
■ STXV0219 ERROR Line["line number"] Source disk is already specified as a target
disk of another copy set.
[Meaning]
The source disk specified in the copy set file is already specified as a Shadow Copy destination for
another copy set. Therefore, it cannot be registered.
[Action]
Correct the copy set file, and try again.
■ STXV0220 ERROR Line["line number"] Target disk is already specified as a source
disk of another copy set.
[Meaning]
The Shadow Copy destination specified in the copy set file is already specified as a source disk for
another copy set. Therefore, it cannot be registered.
[Action]
Correct the copy set file, and try again.
■ STXV0221 ERROR Line["line number"] Failed to obtain device information. Error =
"internal error code"
[Meaning]
Failed to obtain device information. Therefore, it cannot be registered.
[Action]
Check the device status and try it again.
■ STXV0222 ERROR Line["line number"] Failed to access device. Error code = "internal
error code","detailed error code"
[Meaning]
Failed to access device. Therefore, it cannot be registered.
[Action]
Deal with the error according to the contents of the ETERNUS Disk storage systems "detailed error
code", and try again.
For more details about the "detailed error code", refer to "9.3
Detailed Error Codes" (page 125).
■ STXV0223 ERROR Cannot change or delete copy set information in use. Disk =
["physical disk number"]
[Meaning]
The copy set file in use cannot be changed or deleted. Therefore, it cannot be registered.
[Action]
Check the copy session, and try again.