Filter
Top Products
Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
101
■ STXV0224 ERROR Failed to access copy set information.
[Meaning]
Failed to access copy set information. Therefore, it cannot be registered.
[Action]
Correct the copy set file, and try again.
■ STXV0225 ERROR Invalid copy set information.
[Meaning]
Copy set information is invalid. Therefore, it cannot be registered.
[Action]
Use the "Backup Status Query Command" to check that no copy session exists.
For details, refer to "8.5
Backup Status Query Command (stxvquery)" (page 59).
Then, delete the copy set management file ("installation folder"\etc\vss\copyset.cnv), and try again.
■ STXV0226 ERROR Failed to register copy set information.
[Meaning]
Failed to register copy set information. Therefore, it cannot be registered.
[Action]
Use the "Backup Status Query Command" to check that no copy session exists.
For details, refer to "8.5
Backup Status Query Command (stxvquery)" (page 59).
Then, delete the copy set management file ("installation folder"\etc\vss\copyset.cnv), and try again.
■ STXV0227 INFO Number of errors: ["number of errors"]
[Meaning]
"number of errors" errors occurred in the copy set file
[Action]
Follow the action for each error message, and try again.
■ STXV0228 INFO Number of warnings: ["number of errors"]
[Meaning]
"number of warnings" warnings occurred in the copy set file.
[Action]
Follow the action for each warning message if necessary, and try again.
■ STXV0229 INFO ["number of copy set information"] copy set information is registered.
[Meaning]
"number of copy set information" copy set information is registered.