Fujitsu 2.1 Network Hardware User Manual


 
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
34
Chapter 4
Environment Creation
VSSHP supports the following installation methods.
"4.1
New Installation" (page 34)
"4.2 Upgrade Installation" (page 43)
When the "User Account Control" screen appears while performing installation, select [Accept] to
continue the process.
4.1 New Installation
Two types of VSSHP packages are provided. Refer to the following table to determine which package
corresponds to the OS being used, and then download and install this package.
This chapter describes the installation methods to enable target disk pool operation. For the installa-
tion methods to enable copy set operation, refer to "Chapter 4 Environment Creation" in "ETERNUS
VSS Hardware Provider 2.1 Copy Set Operation Technical Guide" as well as this chapter.
Supported OS Download file name
Windows Server 2008 x86 vsshp_2_1_0_32bit.zip
Windows Server 2008 x64 vsshp_2_1_0_64bit.zip
Windows Server 2008 R2
Windows Server 2012
Do not install VSSHP in a LUN used for backup operation such as a source disk and a Shadow Copy
destination disk.