Filter
Top Products
Chapter 8 Commands
8.11 Shadow Copy Destination Recovery Command (stxvrecoverydisk)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
73
8.11 Shadow Copy Destination Recovery Command
(stxvrecoverydisk)
If a backup ends abnormally, the Shadow Copy destination disk may not be able to be checked via
[Disk Management] in the OS, resulting in the backup process being stopped. If this is the case, use
this command to make the Shadow Copy destination disk checkable via [Disk Management].
Execute this command on a backup server.
If a Hyper-V transportable copy is performed, execute this command on a production server and a
backup server.
■ Format
■ Execution example
● When there is a target disk for recovery
● When there is no target disk for recovery
"Installation folder"\bin\stxvrecoverydisk
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvrecoverydisk"
stxvrecoverydisk successfully completed.
C:\>
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvrecoverydisk"
There is no target disk for recovery.
C:\>
• Do not execute this command while performing backup using VSSHP. Doing so may result in the
backup ending abnormally.
• This command may take time to complete its operation.