Fujitsu fi-6130 Scanner User Manual


 
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: Quality of scanned text or lines is unsatisfactory.
Back
Are the upper/lower glasses and rollers inside
the ADF or the document bed and document
holding pad of the Flatbed (fi-6230 only) clean?
NO
Clean the dirty locations.
(For details on how to clean the dirty locations,
see Chapter "
4 DAILY CARE.")
YES
Is there any debris (paper powder or dust) on
the document?
YES
Remove the debris from the document.
Such debris on the document may be
transferred onto the the upper/lower glasses
and rollers inside the ADF or the document
holding pad of the Flatbed (fi-6230 only),
causing the scanned image dirty.
NO
If you cannot solve the problem after taking
measures, check the items in Section "
6.4
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
All Rights Reserved. Copyright 2007 © PFU LIMITED