Filter
Top Products
Network Setup 37
Network Setup
Make sure you follow the instructions on the Start Here sheet to set up your
product, choose your connection, and install the software. The on-screen
instructions during the installation process help you set up your network
connection.
Follow the instructions in this chapter only if you need additional help:
■ For wireless network setup, see below.
■ For wired network (Ethernet
®
) setup, see page 45.
Wireless Network Setup
You must install the software on every computer from which you want to print.
For the first installation, we recommend using a USB cable (not included) to
simplify wireless setup. After the printer is connected to the network, you will be
prompted to remove the cable.
If you are using Mac OS X 10.6 or don’t have a USB cable, you will need to use
the control panel on the printer to select wireless settings instead.
Note:
If you have trouble setting up your product, see page 49.
■ If this is the first time that you’re installing the product, see “Installing for the
First Time” on page 38.
■ If your product is already on your wireless network and you need to set up
additional computers to print to the product, see “Setting Up Additional
Computers” on page 43.