Filter
Top Products
6
www.gateway.com
Password admin “Providing administrator
password and wireless
network name” on
page 32
“Configuring security
settings on wireless
clients” on page 121
Network Name (SSID) “Gateway 7001 AP Network” for the
Internal interface
“Gateway 7001 AP Guest Network” for the
Guest interface
“Reviewing and
describing the access
point” on page 31
“Configuring internal
LAN wireless settings”
on page 76
“Configuring guest
network wireless
settings” on page 76
Network Time Protocol
(NTP)
None “Enabling a network
time protocol server” on
page 78
IP Address 192.168.1.1
The default IP address is used if you do not
use a Dynamic Host Configuration
Protocol (DHCP) server. You can assign a
new static IP address through the
Administration Web pages.
If you have a DHCP server on the network,
then an IP address will be dynamically
assigned by the server at AP startup.
“Understanding
dynamic and static IP
addressing” on page 12
Connection Type Dynamic Host Configuration Protocol
(DHCP)
If you do not have a DHCP server on the
Internal network and do not plan to use
one, the first thing you must do after
bringing up the access point is to change
the Connection Type from “DHCP” to
“Static IP”.
The Guest network must have a DHCP
server.
“Understanding
dynamic and static IP
addressing” on page 12
For information on how
to re-configure the
Connection Type, see
“Configuring Internal
interface Ethernet
settings” on page 71.
Subnet Mask 255.255.255.0
Radio On “Configuring radio
settings” on page 104
Option Default Settings Related Information