Filter
Top Products
21
www.gateway.com
Run the KickStart CD on a laptop or computer that is connected to the same network as
your access points and use it to step through the discovery process.
Important Keep in mind that KickStart (and the other Gateway
administration tools) recognizes and configures only
Gateway 7001 Series self-managed APs. KickStart will not
find or configure other kinds of access points or other
devices.
Run Kickstart only in the subnet of the “Internal” network
(SSID). Do not run Kickstart on the guest subnetwork.
Kickstart will find only those access points that have IP
addresses. IP addresses are dynamically assigned to APs
if you have a DHCP server running on the network. Keep
in mind that if you deploy the AP on a network with no
DHCP server, the default static IP address (192.168.1.1)
will be used.
Use caution with non-DHCP enabled networks: Do not
deploy more than one new AP on a non-DHCP network
unless you change the IP address list in the first DHCP
server, because they will use the same default static IP
addresses and conflict with each other. (For more
information, see “Understanding dynamic and static IP
addressing” on page 12 and “How does the access point
obtain an IP address at startup?” on page 12.)