Filter
Top Products
20
www.gateway.com
Hardware connections for a physically separate guest network
If you plan to configure a physically separate guest network, you need to set up your
network connections differently at this point. The Gateway 7001 Series self-managed AP
ships with an extra network port to support configuration of a physically separate guest
network. Use both network ports on the access point to create two physical connections
to different networks:
■ Create a wired (Ethernet) connection from one of the network ports on the access point
to your internal LAN.
■ Create a second wired (Ethernet) connection from the other network port on the access
point to a separate network.
After you have the required physical connections set up, the rest of the configuration
process is accomplished through the Administration UI. For information on configuring
guest interface settings on the Administration UI, see “Advanced Configuration” on
page 67.
Turning on the access point
Plug in the AC power adapter and plug the power adapter into the Gateway 7001 Series
self-managed AP, then wait for its initialization process to complete.
Running KickStart to find access points and assign IP
addresses
KickStart is an easy-to-use utility for discovering and identifying new Gateway access
points. KickStart scans the network looking for Gateway access points, and displays ID
details on those it finds.