Filter
Top Products
23
www.gateway.com
2 Click Next to search for access points. Wait for the search to complete, or until KickStart
has found your new access points.
3 Review the list of access points found.
KickStart will detect the IP addresses of Gateway 7001 Series self-managed APs. Access
points are listed with their locations, Media Access Control (MAC) addresses, and IP
Addresses. If you are installing the first access point on a single-access-point network,
only one entry will be displayed on this screen.
Verify the MAC addresses shown here against the hardware labels for each access point.
This will be especially helpful later in providing or modifying the descriptive location
name for each access point. Click
Next to continue.
4 Go to the Access Point Administration Web pages by clicking the link provided on
the KickStart page (see “Logging on to the administration Web pages” on page 24).
Important If no access points are found, Kickstart indicates this and presents
some troubleshooting information about your LAN and power
connections. After you have checked hardware power and Ethernet
connections, you can click the Kickstart Back button to search again
for access points.