Filter
Top Products
166
www.gateway.com
Resetting the configuration
If you are experiencing extreme problems with the Gateway 7001 Series self-managed AP
and have tried all other troubleshooting measures, use the
Reset Configuration function.
This will restore factory defaults and clear all settings, including settings such as a new
password or wireless settings.
As an alternative, you can also press the Reset button on the back of the AP for 15 seconds,
wait until the LAN1 LED goes out, then release the button. The AP will reboot with default
settings in place.
To reset the configuration:
1 From the Administration Web page, click Advanced > Reset Configuration. The Reset the
access point back to factory settings screen opens.