Filter
Top Products
124
www.gateway.com
d Select the SSID of the network to which you want to connect, then click Advanced.
The Wireless Network Connection Properties dialog box, which lists available networks
and preferred networks, opens.
2 From the list of Available networks select the SSID of the network to which you want
to connect, then click Configure. The Wireless Network Connection Properties dialog box
opens (with the Association and Authentication tabs for the selected network).
The list of available networks will change
depending on client location. Each network
(or access point) that is detected by the
client shows up in this list. (“Refresh”
updates the list with current information.)
For each network you want to connect to,
configure security settings on the client to
match the security mode being used by that
network.
Note: If the AP is configured to prohibit
broadcast of its network name, the name will
not show on this list. In that case you would
need to type in the exact network name to
be able to connect to it.