Filter
Top Products
CHAPTER 4: Installing Components www.gateway.com
62
8 Loosen the two thumbscrews (1) that secure the system board to the
server.
9 Slide the system board toward the back of the server until it is free of the
eight retaining standoffs (2), then lift the board from the chassis.
10 Place the old system board in a static-free bag for storage.
11 Insert the new system board into the chassis, aligned with the eight
retaining standoffs, then slide the board toward the front of the case so
the board is held by the standoffs.
12 Tighten the two system board thumbscrews to secure the board into the
chassis.
13 Connect the cables you removed in Step 7.
14 Install the memory by following the instructions in “Installing memory” on
page 40.
2
2
2
2
2
1
2
2