Filter
Top Products
Replacing the system board
www.gateway.com
63
15 Replace the system fan cage and fan duct by following the instructions in
“Replacing system fans” on page 46.
16 Install the processor(s) and heatsink(s) by following the instructions in
“Replacing or adding a processor” on page 49.
17 Reinstall the PCI riser assembly by following the instructions in “Installing
and removing PCI expansion cards” on page 44.
18 Follow the instructions in “Closing the server case” on page 32.
19 Turn on your server, then press F2 when the Gateway logo screen appears
during startup. The BIOS Setup utility opens.
20 Check BIOS settings to make sure that they detect the server’s new
hardware, then save your changes (if any) and close the BIOS Setup utility.
21 If your server does not start after installing the new system board, contact
Gateway Customer Care. For more information, see “Getting Help” on
page 10.