Filter
Top Products
Installation
www.gateway.com
13
Installation
Rack mounting the autoloader
The autoloader can be rack mounted using the V-rail kit (included).
The following illustration shows minimum clearances for rack mount
installation:
Minimum clearance to load
or unload a magazine from
the system
Minimum clearance to load
a tape through the mailslot
Clearance to door inside a rack
27.0” (686 mm)
6.0” (152 mm)
2.0” (51 mm)
1.0” (25 mm)
3.4” (86 mm)
Minimum side
clearance (both sides)
Front
Back
Minimum clearance between the
back of the autoloader and the
inside of the rack (using standard
mounting brackets adjusted to
their closest setting)
Tape
magazine
Tap e
Autoloader