Filter
Top Products
CHAPTER 3: Operating your Autoloader www.gateway.com
44
To remove a magazine blank:
1 Pull the magazine blank straight out.
2 Replace with another magazine blank or a cartridge magazine (see
“Installing a magazine” on page 42).
Changing the orientation of a magazine or magazine blank
A magazine or magazine blank can be configured to fit in the right or left
magazine bay. The handle must be removed, the magazine turned, and the
appropriate handle attached to match the orientation of the magazine or blank.
To remove and attach a magazine handle, you need a #1 PHILLIPS® screwdriver.
Right side of magazine
Left side of magazine
Magazine blank (left
side handle shown)