Filter
Top Products
Chapter 2: Installing and Setting Up your Autoloader www.gateway.com
30
5 Scroll to set the number of minutes difference between your local time
and GMT, then press E
NTER. The new time zone is set.
6 Press ESC or ENTER to return to the Main menu.
To set the date and time:
1 From the Main menu, click Configuration, then press ENTER. The
Configuration submenu opens.
2 Scroll to Time, then press ENTER. The Time submenu opens.
3 Scroll to Set Date/Time, then press ENTER. The Date/Time screen appears,
letting you set the date and time. The cursor automatically appears at the
first digit.
4 The first four digits represent the current year. At each position of the year,
use the up and down arrows to change the value of each digit. Press E
NTER
to advance the cursor to the next digit.
5 The next two digits represent the current month. At each position of the
month, use the up and down arrows to change the value of each digit.
Enter a leading 0 if the month is a single digit. Press E
NTER to advance the
cursor to the next digit.
6 The next two digits represent the current day. At each position of the day,
use the up and down arrows to change the value of each digit. Enter a
leading 0 if the day is a single digit. Press E
NTER to advance the cursor to
the next digit.
7 The next two digits represent the current hour. At each position of the
hour, use the up and down arrows to change the value of each digit. Enter
a leading 0 if the hour is a single digit. Press E
NTER to advance the cursor
to the next digit.
8 The last two digits represent the current minute. At each position of the
minute, use the up and down arrows to change the value of each digit.
Enter a leading 0 if the minute is a single digit. Press E
NTER to advance the
cursor to the next digit.
9 Press ENTER to save.
10 Press ESC to return to the Main menu.
Setting the Change mode
You can set the autoloader Change mode to either Random or Sequential. The
default change mode is Random.
In Random mode either you or the backup software can specify which cartridge
you want to use and where you want it to go. You will probably use this mode
the most.