Filter
Top Products
Using the Configuration page
www.gateway.com
59
3 To change the IP address from a static address to a dynamic address, click
the box next to DHCP.
To set the network configuration:
1 To change the values of the subnet mask, gateway, Simple Network
Management Protocol (SNMP) server, or the time server, type in the new
address, using the T
AB key to move from box to box.
2 Click Submit.
Setting security options
When you enable the security option, users must enter a password to access
the autoloader's front panel functionality (see “Default username and
password” on page 55). A password allows either administrator-level access or
operator-level access (see “Setting security” on page 32).
To set security:
1 From any page, click Configuration. The Configuration screen opens.
2 Click Security on the left side of the screen. The System Security section
of the screen displays.
3 To enable front panel security, click the box next to Front Panel Security
Enabled.
If the box is blank, the security option for the front LCD panel is not
enabled.
4 Click Submit.
To reset the front panel password:
1 From any page, click Configuration. The Configuration screen opens.
2 Click Security on the left side of the screen. The System Security section
of the screen displays.
3 Click the box next to Reset Front Panel Password. A check mark appears.
4 Click Submit.
To set User Administration:
1 From any page, click Configuration, then press ENTER. The Configuration
submenu opens.
2 Click Security on the left side of the screen. The System Security section
of the screen displays.