Filter
Top Products
Section 2: Getting Started 2-5
70055MP Revision D February 3, 2000
LCD Display
The LCD is a 20 character by 4 line display (Figure 2-3). It displays
operating and status conditions. Screens are scrolled through using
the Operating Conditions and Alarm Status & Settings buttons.
L T C - M
A P 2 1 3 0
r e v 2 1 3 0 . x x . y y
c o p y r I g h t ( C ) 1 9 9 7
< <
Operating Alarm Status
Conditions & Settings
Figure 2-3: Display with Control Buttons
Serial Port
CAUTION: The serial port and the modem cannot function
simultaneously. When using the serial port for communications, the
internal modem (if installed) must be disconnected at JP8; otherwise
the serial port will not function.
The serial port is a 9-pin male DB-9 connector. This port allows direct
connection, utilizing a null modem cable, between the LTC-MAP 2130
and a portable computer for data transfer. Data transfer rate is
19.2 kbps.
The serial port does not support dumb terminal operation. In order for
communications to take place:
• A null modem cable must be installed between the monitor serial
port and personal computer serial port.
• SAGE host software must be installed on the personal computer.
NOTE: A null modem cable is available (Part No. 10101MP ).