Filter
Top Products
1. Select <Edit>.
2. Group: Displays the trunk group ID.
. LACP Work Port Num: The maximum number of ports that can be aggregated at the same
time. If the group is LACP static trunking, the excess ports are standby and able to aggregate
if work ports fail. If the group is local static trunking, the number of ports must be the same
as the group member ports.
OTE: Before setting this page, you first have to set trunk groups on the Trunk Configuration
age.
.3.4.3 State Activity
. Select <Edit>.
.PressSpace key to choose the item.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and responds only if it
receives LACP protocol packets from the opposite device.
.PressCtrl + A go back action menu line.
. Select <Save> to save configure value.
NOTE: If you set a trunk group to LACP mode, all of the member ports of this trunk group will
automatically be set to "Active".
3. LACP: Displays the trunk group’s LACP status.
4
N
p
7
1
2
3
4
111