Filter
Top Products
5.4.5.3 State Activity
Active (select): The port automatically sends LACP protocol packets.
N/A (not selected): The port does not automatically sends LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
1. A link that either has two active LACP ports, or one active port can perform dynamic LACP
trunking. A link that has two ϘN/Aϙ LACP ports will not perform dynamic LACP
trunking because both ports are waiting for an LACP protocol packet from the opposite
device.
2. If the port is an active LACP actor, the active status will be created automatically when you
select port trunking.
31