Filter
Top Products
4.3 Telnet Management
In addition to local terminal mode operation, the switch supports remote management through
Telnet over the network or even over the Internet for browser-less environments. In this mode,
before executing the Telnet program, you will again be asked to modify the IP Configuration
settings as required for management via a web browser. Again, after changing the settings, save
them and connect your Ethernet cable from your PC to any port on the switch. Then, to access
the switch, simply follow the prompts in the command lines:
Telnet: IP Address for the Switch
The following dialogue below appears. Input the user name and password to proceed. Please
refer to chapter 3 of this manual to for instructions on operation in this mode.
14