Filter
Top Products
7.2.2 Trunk Configuration
Thi m of seven trunk groups. You can arbitrarily select
up t nk group.
1. Select <Edit> on the “actions” menu
2. Press the spacebar to configure the member ports of a trunk group. You will also have to set
the corresponding trunk groups between TRK1 and TRK7 to “Static” or “LACP”.
“Static” – the standard/normal method of trunking.
“LACP” – this method of trunking utilized the link aggregation control protocol (LACP).
3. Press Ctrl + A to go back to the action menu line.
4. Select <Save> to save all configured values.
5. If the items of TRK1-TRK7 are set to “Disable”, then the corresponding the trunk group will
be deleted.
s page will allow you to create a maximu
o four ports from ports 1-26 to build a tru
67