Filter
Top Products
3. You can change the settings for the STP parameters. Then click Apply.
Parameter Description
Priority
You can change the priority value, which is a value used to identify the
root bridge. The bridge with the lowest value has the highest priority and is
selected as the root. Enter a number between 1 and 65535.
Max Age
You can change the max age value, which is the number of second bridge
waits without receiving spanning-tree protocol configuration messages
before attempting a reconfiguration. Enter a number between 6 and 40.
Hello Time
You can change the Hello Time value, which is the number of seconds
between the transmissions of spanning-tree protocol configuration
messages. Enter a number between 1 and 10.
Forward Delay
Time
You can change the forward delay time, which is the number of seconds a
port waits before changing from its spanning-tree protocol learning and
listening states to the forwarding state. Enter a number between 4 and 30.
46